Table of Contents
TDA1519 power amplifier circuit, TDA1519CL is a 2x11w audio power amplifier chip, single power supply, fewer components and simple circuit. BTL power can reach 22w.
The TDA1519C is a class-B dual output amplifier integrated into a 9-lead plastic single in-line power package or a 20-lead heatsink small outline package. In the TDA1519CTH (SOT418-3) version, the heatsink is placed on top of the package, enabling the mounting of an external heatsink. The TDA1519CTD (SOT397-1) has the heatsink facing the PCB, allowing for it to be soldered onto the copper area of the PCB.
Schematic TDA1519 power amplifier circuit TDA1519CL
Features TDA1519 power amplifier circuit TDA1519CL
- Requires very few external components for Bridge-Tied Load (BTL) operation
- Stereo or BTL application
- High output power
- Low offset voltage at output (important for BTL applications)
- Fixed gain
- Good ripple rejection
- Mute/standby switch
- Load dump protection
- AC and DC short-circuit safe to ground and VP
- Thermally protected
- Reverse polarity safe
- Capability to handle high energy on outputs (V P = 0 V)
- No switch-on/switch-off plops
- Protected against electrostatic discharge
- Low thermal resistance
- Identical inputs (inverting and non-inverting)
- Pin compatible with TDA1519B (TDA1519C and TDA1519CSP).
In this circuit use TDA1519C SIL9P plastic single in-line power package; 9 leads
The TDA1519C is equipped with two identical amplifiers, each with a fixed gain of 40 dB and differential input stages. One notable feature of this device is the mute/standby switch, offering the following capabilities:
-  Low standby current (<100 µA)
- Low mute/standby switching current (allows for low-cost supply switch)
- Mute condition.
BOM TDA1519 power amplifier circuit TDA1519CL
Parts | Value | Description | Quantity |
---|---|---|---|
Resistors | |||
R1 | 10kΩ | Potentiometer | 1 |
Capacitors | |||
C1, C2 | 220n (224) | Film capacitor | 2 |
C7 | 100nF (104) | Ceramic capacitor | 1 |
C3 | 1000uF/25V | Electrolytic capacitor | 1 |
C5 | 100uF/25V | Electrolytic capacitor | 1 |
C6 | 2200uF/25V | Electrolytic capacitor | 1 |
Semiconductors | |||
D1 | GBU808 | GBU Bridge rectifier | 1 |
J1 | XH2.54_3P | 2,554 mm 3 pin connector | 1 |
U1 | TDA1519CL | HSIP-9B – 22 W BTL or 2 x11 W stereo power amplifier |
1 |
Miscellaneous | |||
DC1 | DC-005A-20A | 2mm 6.4mm DC Power Connector | 1 |
U2 | KF128-5.08-3P | 1×3 5.08mm Screw Terminal Block | 1 |
U3 | KF128-5.08-2P | 1×2 5.08mm Screw Terminal Block | 1 |
Download files, links, and notes
- Download PCB in Gerber + BOM + Centroid file + PDFÂ
- Mirror
- BUY IC TDA1519 original
- BUY amplifier DIY kit
- PDF Datasheet TDA1519C
Source: https://oshwhub.com/m1138155/tda1519cl