Download CapCoder Capacitor convert pF nF uF

Download CapCoder - capacitance in microfarads, nanofarads and picofarads tolerance for numeric code capacitor

Download CapCoder Capacitor convert pF nF uF, CapCoder gives the capacitance in microfarads, nanofarads and picofarads and tolerance of any capacitor code entered into its input section. Example : 104J. This app uses numeric spin-buttons and a combo box so that no typing is required for data entry.

This small app is for easily determining the capacitance value of any capacitors that you may have on hand by entering the code written on the cap surface.

Download Capcoder Capacitor Convert Pf Nf Uf

Using this program CapCoder Capacitor convert pF nF uF:

To “read” a capacitor code, enter the code using the spin buttons and push the Calculate button. The entered code plus the capacitance in microfarads, picofarads and nanofarads
will be displayed.
Use the first two spin buttons to set the initial two code digits from your capacitor. If there are three digits then enter the third digit in the third spin button control.
example: 10 pF = 1 0 0 , 100 pF = 1 0 1 etc.
The tolerance value is set using the drop-down combobox and is displayed automatically. Tolerances that specify +/- pF values are generally used on capacitors that are 10 pF or less.
This app should do all practical standard value capacitors.

Download CapCoder Capacitor convert pF nF uF

Download CapCoder

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

About the author
Xtronic.org blog author. Electronics technician for the technical school of Brasilia - Brazil. Interested in electronics, circuits and technology in general.
Share:

5 thoughts on “Download CapCoder Capacitor convert pF nF uF”

Leave a Comment

Exit mobile version