Download Coil Maestro calculator inductor

Download Coil Maestro calculator inductor. The Coil Maestro program calculates optimal dimensions of coils for wanted inductance. It is simple to use but flexible so it can help you not just to make calculations but to find optimal measures or experiment with very flexible parameters.

OPTIMAL COIL CALCULATOR isused when you have to make coil of known characteristics. It allows you to experiment with different coil parameters to get to the optimal values. If you set wide range of parameters, it will try to find most optimalby itself.

Download Coil Maestro Program Calculates Dimensions Of Inductance  Calculator Inductor

Default values will help you understand how the application works. There is also drawing explaining what is meaning of each parameter. Some parameters are presented as range. You may use this range to force specific values for that parameters. If you want to limit range to single value, just set both min and max to the same value.

If you are not certain which range will do the best for wanted calculation, set large ranges. Calculation will take some time but it will give you some results. Our sugestion is to increase step value to cut the time. In that way you wil get rough caculation but, once you get it you will be aware what range you should set to get finer result.

COIL INDUCTANCE CALCULATOR helps you calcualte inductance od the coil which dimensions you know. It is helpful when you get unknown coil so you can only measure it’s dimensions.

Download Coil Maestro program calculates dimensions of inductance  calculator inductor

Download Coil Maestro

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

About the author blog author. Electronics technician for the technical school of Brasilia - Brazil. Interested in electronics, circuits and technology in general.

1 thought on “Download Coil Maestro calculator inductor”

  1. I’ve yet to find the formulas for coil windings that I used for crossover networks in DIY speaker cabs. I am very glad to have found this site.


Leave a Comment

Exit mobile version