TDA2030 amplifier circuit board diagram. TDA2030 is a circuit integrated monolithic in Pentawat® package, to be used as class audio amplifier AB. Typically, he supplies up to 14 Watts of potency (d=0.5%) @ 14V/4 Ω. The guaranteed potency is 12W in a load of 4 Ω and 8 watts in a load of 8 Ω. Integrated him/it bills with circuits of component protection.
Description of the circuit
Audio amplifier with having integrated tda2030, using source of simple feeding, for potency of 14 watts with a source of 15 volts. That source should be with transformer, rectifications and good filter capacitors, there is no need of regulated source. For protection of the circuit, to use a fuse of 3 amperes in the line of +b of the amplifier. Use a heat-sink of heat in the circuit, integrated tda2030.
See the datasheet of the tda 2030 to know which heat-sink to use. That integrated it is cheaply and easy to find at the market. For a version in bridge for until 28 watts@14v and version using symmetrical source sees the datasheet of the tda2030. That circuit can be fed by car batteries by good time without needing to recharge her. The tda2030 is usually found as amplifier of stage of potency of systems of home theater, it is in those that promise 1000 Watts of potency.
For now, a tda2030 supplies 14 watts, then 5 tda2030 supplies less than 100 watts RMS. But that is a good idea, to use the tda2030 as amplifier of potency of system’s surround, for the subwoofer the ideal is an assembly in bridge for more potency.
Circuit diagram audio amplifier with tda2030a
Suggestion of printed circuit board for assembly of the amplifier with tda 2030.
Part list to assemble or amplifier
Last update: 07/28/2021 17:06
| Parts | Value | Description | Quantity |
| Capacitors* | |||
| C1, | 1uF/16V | Electrolytic Capacitor | 1 |
| C1A | 1uF/100V (Optional) | Polyester Capacitor | 1 |
| C2 | 4.7µF | Electrolytic Capacitor | 1 |
| C3 | 100nF | Ceramic Capacitor | 1 |
| C4 | 22uF | Electrolytic Capacitor | 1 |
| C5 | 100uF | Electrolytic Capacitor | 1 |
| C6 | 220nF | Polyester Capacitor | 1 |
| C7 | 2200µF | Electrolytic Capacitor | 1 |
| Miscellaneous | |||
| CN1 | IN | Terminal block 2 pin 5.08 mm | 1 |
| CN2 | DC | Terminal block 2 pin 5.08 mm | 1 |
| CN3 | OUT | Terminal block 2 pin 5.08 mm | 1 |
| Semiconductors | |||
| D1, D2 | 1n4004 | Diode | 2 |
| IC1 | TDA2030 or TDA2030A | Audio amplifier IC | 1 |
| Resistors | |||
| R1 | 150k | Brown, Green, Yellow, Gold | 1 |
| R2 | 4.7k | Yellow, Violet, Red, Gold | 1 |
| R3, RA, RB | 100k | Brown, Black, Yellow, Gold | 3 |
| R4 | 1 ohm 1W | Brown, black, gold, gold | 1 |
| Solda, Fios, Pci, Caixa, fonte | |||
*The working voltage of the capacitors is related to the maximum DC voltage of the supply:
- Up to 12V—16V capacitors
- Up to 18V—25V Capacitors
- Up to 26V—35V Capacitors
- Above 26V—50V Capacitors
Updated files, including Gerber and new PCB layout
Download the PDF files for assembling the amplifier
Mirror
PDF Datasheet for ci TDA2030 tda230
Buy kits TDA2030 in AliExpress with free Shipping in the Worldwide.
Ainda acha esse CI original?
Olá Alcineu, da ST está obsoleto, mas tem outras marcas como UTC e outras.
In the video I only see 1 diode not 2. Am I only putting one diode?
Hello Marc
Olá Toni os resistores podem ser 1/2 w
Olá Carsdoso
Pode sim!
Obrigado Toni,
E pode dizer qual As medidas da pcb
Obrigado
Olá Nuno
6.4 x 3.9 cm;
Hi. I made d amp. Its pretty silent when no music. But When playing it sounds nosy and not clean. please what else can I do
electricfan0101@gmail.com
Please Send Me 50watts Of Amplifier Using TDA 2030 Thanks
https://xtronic.org/circuit/amplifier/32w-hi-fi-power-amplifier-tda2050/
I made it and it works perfectly you can watch here:
https://youtu.be/ADzFOcvX7OY
Hello Ashish
Please add link for this page!
Thanks!
How can i increase bass on this amp
Hello ICT
Use high current power supply!
I am bgener intrsted about amplifier. But i dont know how to choose a good quality. Uf you have sir pls gve me a good q amps about 50watts. Thanks in adv.
Hi Brian
For Beginners!
It’s good to start with those less powerful amps!
Hi Toni,
please send the good quality tone cone control and sub pre circuit for tda 7294 to my mail id.
i want a simple mosfet power amp circuit,if you have plez send to me.
plz i want 1000w amp circuit…..
pls send me that 400watt amplefier
Thank you !
nisanthks01@gmail.com
pls sent me the power amp diagrms u have
HI nisanth
OK
Eu visito muito seu site Te1.com :p
if you want a good high power audio amplifier of 4oo watts i hava schematic diagram just send ur emailaddress and ill send you a copy of it ok.
Mr. joeri plz send me the good high power audio amplifier of 4oo watts detail.
Thanks in adv.
please send me a circuit of 400watt amp,
can i get dimensions plz sir