2n3055 audio amplifier with transistor, Powerful audio amplifier with 2n3055
- C1 capacitor governs the low frequencies (bass), with the capacitance grows, the lower shorter intervals are increasingly high.
- Â Capacitor C2 regulates the higher frequencies (treble), with the capacitance grows, the higher frequencies are getting quiter.
- This is a class B amplifier, this means that the current must flow through the transistor end, even if there is no sign at the entrance. This current can be adjusted with the 500 Ω resistor trimmer.
- As this increase present, the sound of the amplifier is better, but the effect transistors are more heating. But if this deceases current, the transistors are not very warming, but the sound gets worse
 PCB files for this amplifier here
Assalam o Alaikum!
I am going to make this circut.
Please send me the PCB layout.
May I use BU508, D1047 instead of 2N3055
Thanks
I am going to make this circuit.
But i have a confusion ,
What its output power with 30v
And 50v
Is it able to give 150w rms
THIS IS AN CLASSIC 40W PHILIPS AUDIO AMPLIFIER, 1972 OR SO.
I WOULD LOVE TO DO IT, DO YOU HAVE AN PCB LAYOUT FOR THIS?
THANKS A LOT
Hello Gabe
PCB here
https://www.te1.com.br/2011/11/placas-para-o-amplificador-com-2n3055/
HELLO, DO YOU HAVE THE PCB LAYOUT FOR THIS AMPLIFIER?
THANKS
good morning
please can you send the pcb layout
thak you very much patrick
Please use a valid e-mail!
Hi! there! nice circuit been looking for this 2N3055 with single supply.. can you send me a pcb layout for this and also a suitable power supply diagram for this..
thanks a lot!