Circuit 22W Stereo Amplifier Using TDA1554

ci-tda1554q-tda-1554q-tda1554-tda-1554-original

Here is the 22 watt stereo audio power amplifier circuit diagram based on TDA1554 and integrated circuit from NXP semiconductors (formerly PHILIPS semiconductors). It is very simple and useful circuit for amplify the stereo signals .The circuit dissipates roughly 28 watts of heat, so a good heatsink is necessary. The chip should run cool enough to touch with the proper heatsink installed .the circuit operates at 12 Volts at about 5 Amps at full volume. Lower volumes use less current, and therefore produce less heat. R1 is also a 5% resistor.

Circuit 22W Stereo Amplifier Using Tda1554

How useful was this post?

Click on a star to rate it!

Average rating 3.7 / 5. Vote count: 6

No votes so far! Be the first to rate this post.

About the author
Xtronic.org blog author. Electronics technician for the technical school of Brasilia - Brazil. Interested in electronics, circuits and technology in general.
Share:

1 thought on “Circuit 22W Stereo Amplifier Using TDA1554”

Leave a Comment


Exit mobile version