Download SatHunter is a program for calculating the orientation of a satellite antenna. SatHunter contains all the necessary information for adjusting the satellite antenna to the selected satellite. The adjustment is made thanks to evaluatable tools (a compass or a protractor, a plumb, a tape measure) and requires neither expensive equipment nor deep knowledge about satellite television. SatHunter – An easy-to-use tool that will help you to align a satellite system and easily find the signal from a satellite.
The program has many features, such as: Sat azimuth, Sat elevation, Transponder list, DVB Tuner and more. SatHunter – Find TV satellites in the sky.
- Calculates the azimuth and elevation angle.
- Provides a list of satellite transponders for setting up the receiver.
- Calculates the solar azimuth angle.
- Calculates the time when the satellite and solar azimuth angles coincide.
- Calculates the antenna offset angle and tilt.
- Points the antenna using the azimuth, thanks to the sun and a protractor.
- Points the antenna using the azimuth, thanks to a compass.
- Adjusts the elevation angle thanks to a tape measure and a plumb.
- Detect coordinates by IP or by using a list of cities.
- Detects time using an exact time-server.
- Scans transponders with a SkyStar DVB card.
- View signal level and quality with sound signalization.
The Site Tab
Time and date are automatically adjusted when you start SatHunter.
At any moment, you can get the local computer time (using the Get local time button) or get it from an exact time-server (using the Get SNTP Time button).
Enter your local geographic coordinates.
If you do not know your coordinates, select the nearest city from the city list or click the “Autodetect” button, and SatHunter will try to detect your location automatically.
The Satellites Tab
From the list provided, select the satellite to which you want to point the antenna:
You will see the necessary data for the antenna setup in the lower pane:
Sat azimuth – Orientation towards the satellite
Sun azimuth – Orientation towards the sun
Sat-Sun – The difference between the solar and satellite azimuth for orientation with the help of a protractor
L – Angle relative to the plumb
X – Offset (in millimeters) from the plumb
R – LNB rotation
The Sun Tab
Find the difference between the solar azimuth and the satellite azimuth for the desired time.
The shadow from the sun will point to this angle in case of exact orientation towards the satellite. Print the protractor and attach it to the antenna (180 forward).
Match the shadow with the selected angle by rotating the antenna.
The Multifeed Tab
It is possible to receive a signal from several satellites with one antenna.
To do so, position the LNBs according to the calculated scheme.
Focus – Focal length (in millimeters). This is the length between the LNB and the point on the satellite dish to which it is directed.
Center – Central satellite.
Feed – Side satellite.
Converter – LNB diameter (in millimeters).
Enter the parameters, then click “Calculate”, and SatHunter will calculate the LNB position.
Mount the second LNB and connect it to the receiver via the DiSEqC switch.
The Tuner Tab
If there is a SkyStar tuner installed on your computer, you can use this section to fine-tune the antenna.
Use the list to select the necessary transponder or enter its properties manually, then click the “Set Tuner” button.
1 thought on “Download Sathunter Calculate angles of satellite dishes”