Download WinISD Pro speaker designer calculate filter

Download WinISD Pro speaker designer calculate filter. The WinISD Pro program was designed to be a freeware speaker designer software. You will be able to design Closed, Vented, Bandpass boxes and passive radiators with this program. It also allows you to calculate few different types of filters.
Is freeware speaker designing software for Windows 9x/NT environment. You can design Closed, Vented and Bandpass boxes with this program. It also allows you to calculate few different types of filters.
WinISD Pro a free speaker designer software that also allows you to calculate few different types of filters.

Download Winisd Pro Speaker Designer Calculate Filter

What’s new in WinISD Pro 0.50 Alpha 7:

· If project file is changed, the program now asks if user wants to save the project. (Juha)
· Added voice coil thermal simulation fields. Now you can simulate the effect of voice coil heating based on temperature rise that you specify. You can also specify resistance temperature coefficient of voice coil material. (Janne)
· Added several alignment options for closed and vented box. Program now suggests different alignments based on Qts value. (Janne)
· Box alignment calculation now considers external resistance and reduction of Q as box has some absorption loss. Leak losses are not considered when calculating alignments. (Janne)
· Added passive radiator extra mass dragging for passive radiator. Dragging vertically changes passive radiator extra mass ⇒ tuning frequency is changed. This requires that you enter some initial extra mass for passive
· radiator for this to work. (Janne)
· Added showing of air density value to “Environment tab”. (Janne)
· Added option to “cross-calculate” vents. User can now specify physical vent properties, and tuning frequency is calculated according to that length. This can help when studying existing boxes. No more guesswork. (Janne)
· When changing environment values, physical vent dimensions stay constant, and box tuning is recalculated. This allows you to investigate temperature sensitivity of your design. (Janne)
· Added calculation of first port resonance frequency. This shows the frequency of first “organ pipe” resonance. Others are multiplies of this frequency. (Janne)
· Added option to change end correction factor. (Janne)
· Added drawing of -3 dB line. (Janne)
· Added drawing of excursion limit. (Janne)
· Added option to configure rms, peak or peak-to-peak excursion and air velocities. (Janne)
· Added calculation of off-axis responses. User can now specify off-axis angle. (Janne)
· Added simulation of various types of prototype filters. This is a very nice feature, since now, you can add various combinations of these filters, and see their combined impact on frequency response (magnitude and phase), cone excursion and group delay. You can also plot frequency response or group delay of equalizer/filter chain.
· EQ/Filter transfer function magnitude plot has its own plot limits. (Janne, Juha)
· Added option relative cursor readings. Just doubleclick in plot window after setting to reference point to enable relative cursor readings. (Janne)
· Added option to change and specify voice coil connection mode, all VCs in parallel or in series. (Janne)
· Added amplifier apparent power graph. This shows apparent power taken from the feeding amplifier, to assess amplifier loading. (Janne)
· Added parameter tracking to the driver editor. Now, driver editor tracks which parameters were entered and which were calculated. (Janne)
· Driver editor now internally recalculates all calculated parameters, when the user enters a new value for an already entered parameter. This makes easy to correct entries. (Janne)
· Driver editor now checks all parameters by calculating through all relations between parameters. This assures that data is always
· correct. (Janne)
· Moved “check internet for new version” under “Help/online” menu (Juha)
· Changed online support to point forums instead of email (Juha)
· Changed text “Frc” to “Fsc” for more consistency, like Qts ⇒ Qtc. (Janne)
· Calculation of models rewritten for better clarity. (Janne)
Bugs fixed:
· ‘New project’-window now remembers last driver (Juha)
· Many cosmetic fixes. (Juha)
· Fixed toolbar colours if user was using customized colour scheme. (Juha)
· Fixed bug where certain editboxes were hard to edit by hand (program was overwriting what you just typed) (Juha)

Download WinISD Pro speaker designer calculate filter

Download Winisd Pro

How useful was this post?

Click on a star to rate it!

Average rating 4.6 / 5. Vote count: 13

No votes so far! Be the first to rate this post.

About the author blog author. Electronics technician for the technical school of Brasilia - Brazil. Interested in electronics, circuits and technology in general.

Leave a Comment

Exit mobile version