Home Download Download VeroCAD free 3 – Veroboard for prototyping circuits

Download VeroCAD free 3 – Veroboard for prototyping circuits

9454
1
SHARE
VeroCAD-software-pcb

A quick and simple tool for prototyping with perforated circuit boards. Select components from a built in library, place and arrange the parts by pin or groups of pins. Add trace cuts and shorts then either print a component locator label to identify and locate parts on a pre-perforated circuit board or export a net list for use in a commercial PCB package.

VeroCAD Demo1 Download VeroCAD free 3   Veroboard for prototyping circuits tot

The use of Veroboard™ for prototyping circuits is common among hobbyists and professionals. One common method used is called “best guess”, this method is to position the components on the board then rearrange each or all until the best position is found. “best guess” is extremely time consuming and prone to error. VeroCAD addresses this issue by allowing the builder to visually layout the board and reposition components with a click of a button. So what did take 3 hours can now be achieved in 3 minutes. When the design is complete the layout can be printed to a label, this label is then attached to the perf-board and used as the hole and component locator. Not only can the board be laid out in a fraction of the time, it can also be assembled quickly and accurately.

he use of perforated circuit boards for prototyping designs is common among hobbyists and professionals. The method used to transfer a circuit schematic to a working prototype is to position the components on the board then rearrange each or all until the best position is found. This best guess method is extremely time consuming and prone to error. VeroCAD addresses this issue by allowing the builder to visually layout the board and quickly reposition components. When the design is complete the layout can be printed to a label; this label is attached to the perforated board and used as the component locator. Now the board can be assembled quickly and accurately.

Select components from a built in library, place and arrange the parts by pin or groups of pins. Add trace cuts and shorts then either print a component locator label to identify and locate parts on a pre-perforated circuit board or export a net list for use in a commercial PCB package.

Download VeroCAD

1 COMMENT

LEAVE A REPLY

Please enter your comment!
Please enter your name here