Download RF Toolbox Antenna design and electronics electrical tool, RF Toolbox is an antenna design and electronics/electrical tool package.
RF Toolbox is an antenna design and electronics/electrical tool package. It takes you step by step through the design of the following types of antennas:
- Dipole
- Fat Dipole
- Yagi
- J-Pole
- Super J-Pole
- Log Periodic
- Cubic Quad
- Vertical
- helical
It also performs the following calculations:
- Transmission Line Calculator
- Coil Design
- LC Filter Design
- Transmission Line Loss
- L Matching Networks
- Pi Matching Networks
- Impedance Calculations
- Wire Gauge and Resistance and Voltage Drop
- Wire Inductance Calculations
With the transmission line calculator, you can select the type of line, length, operating frequency, and calculate the losses, as well as the SWR and losses from SWR due to impedance mismatch. The load impedance can also be calculated from the measured impedance at the line input.
Download RF Toolbox 5.2 Antenna design and electronics electrical tool
- Download RF Toolbox for Windows 8 and 10. Version 5.2.0 Setup Program (9 May 2018)
- Download RF Toolbox for Mac OS X 10.9.5 – 11. Version 5.2.0 .dmg format, 64 bit app (9 May 2018)
- Download RF Toolbox for Mac OS X 10.9.5 – 11. Version 5.2.0 .dmg format, 64 bit app (9 May 2018)
- RF Toolbox for Linux (Version 3.9.0, 2M) (Requires GTK+ 2.0 or better) Note: The linux version may not run on all versions of Linux
